Bodine B4CF2P Cold-Pak Emergency Ballast 925 Lumens - 2 Lmp

SKU:
Weight: 3.1 lb
Review
FAST SHIPPING FOR ITEMS IN STOCK*
FAST SHIPPING FOR ITEMS IN STOCK*
MONEY BACK 100% GUARANTEE
MONEY BACK 100% GUARANTEE
30 DAYS HASSLE-FREE RETURNS
30 DAYS HASSLE-FREE RETURNS
LOWEST PRICE GUARANTEE
LOWEST PRICE GUARANTEE

That moment when you realize that your facility's electrical power has shut down, thus slowing down operation at your parking garage for a period of time. This issue may give off the wrong idea to potenial customers and you could lose income temporarily.  Be prepared for a future power outage by installling the Bodine brand electronic ballast.

Our B4CF2P Cold-Pak model will provide emergency power to your lighting system even if it's in a damp or wet location. A sealed nickel cadmium (NiCad) battery will automatically provide a temporary lighting source for up to 90 minutes once power fails. Composed of electrical steel, this ballast can be used either indoors or outdoors. 

Call our amazing ballast guys for the best price!

Features

  • Operates: one or two CFL/T5 Circline lamp units
  • Backup time: 90 minutes
  • Primary Light Output: Up to 925 
  • Dual Operating Voltages: 120/277V
  • AC Operating Power Rating: 15 Watts
  • Test Switch: Single Pole
  • Recharge Time: 36 Hours

Application

The B4CF2P Cold-Pak can be installed on top, inside of, or remotely to a CFL fixture with a conduit (included). Remote installation is recommended at a maximum of 6 feet in distance from lamp. For simple visual check up of the charging indicator light and for easy testing, the test/monitor plate can be installed near the fixture.

External Specifications

It can be used either with switched or unswitched mode of fixture. If a switched fixture is used, an unswitched live wire must be connected to the emergency ballast for feeding the emergency ballast through AC circuit. The B4CF2P Cold-Pak can be installed inside or on top of the fixture.

Electrical Specifications

Input power for B4CF2P Cold-Pak is 15W with a battery capacity is 19.2 Watt-hour, which meets emergency standards, set out by the National Electrical Code (NEC). This emergency ballast also has delay timer of 3 seconds to prevent under voltage false tripping. It can operate more than one (1) compact fluorescent lamp depending upon the wattage at 910 lumens. Its backup time is 90 minutes in emergency mode.

mm.jpg

Compliance

  • UL Listed
  • National Electrical Code (NEC)
  • Life Safety Code (NFPA-LSC)
  • UL 924

Dimensions

  • Length: 9.4”
  • Width: 2.4”
  • Height: 1.5”
  • Weight: 3 lbs

Contact our expert customer service team for more information about this ballast, today! The Ballast Co. is open 24 hours, 7 days a week. Our expert staff is available for questions and/or sales at (800) 887-9957 or sales@servc.com

The manufacturer warrants that Electronic Fluorescent ballasts sold by Ballasts.com are defect-free in both the material used and workmanship for a time period of up to five years from the date of purchase with normal use and company shall not be responsible for damage due to natural or forced causes.
Reviews
review-image
Feel Enlightend! Share it.

Recently Viewed

Your cart is currently empty.

Continue Browsing