Loader Gif  Loading... Please wait...
Facebook Twitter Pinterest GooglePlus

Bodine B60 Emergency Ballast 600-700 Lumens - Damp Locations

2.50 LBS
Ships within 24 to 48 hours. Product may be out-of-stock or back-ordered without notice. Please call for immediate availability.
Calculated at checkout

Question about Bodine B60 Emergency Ballast 600-700 Lumens - Damp Locations? Request A Quote

Live Chat

Product Description

Hazardous locations require a tremendous amount of care and vigilance. Imagine the possibilities of what could happen if power were to fail. One solution for this potential emergency lighting in case of a power outage in damp area is our Philips Bodine B60 emergency ballast.

During a blackout, the Philips Bodine B60 emergency ballast can quickly switch to emergency mode, while operating one or two lamps at a reduced lumen output at a minimum backup time of 90 minutes. Once AC power is restored, it returns to its initial charging state.

This emergency ballast operates one or two (2’-4’) T8, T10 or T12 lamps, one 17 - 215 W (2’-8’) tubular lamp or one (4-pin) long compact lamp at reduced illumination. It also comes with an on delay timer of 3 seconds, which helps for the avoidance of any electrical trips.

Call our amazing ballast guys for the best price!


  • Ideal for damp locations 
  • Operation of two lamps at a time
  • Compatible with end of lamp life
  • Backup emergency time without any interruption is 90 minutes
  • Primary Light Output: 600 - 700 Lumens
  • Full Warranty: 3 Years (NOT pro-rata)
  • Dual operating Voltage: 120/277 VAC
  •  Frequency = 60 Hz
  • AC operating Current: 280 mA 
  • AC operating Power Rating: 3.5 Watts
  • Test Switch: Single Pole
  • Recharge Time: 24 Hour 


The B60 may be fixed inside, on top of or remotely from the fluorescent fixture. Recommended remote distance of AC ballast is up to 50 feet from the lamp. Fixation is not suggested with fixtures where the ambient temperature may fall below 0°C. The B60 does not change normal fixture function and may be used with either a switched or unswitched fixture. If a switched fixture is used, an unswitched live wire must be connected to the emergency ballast. It will be fed from the same AC ballast electrical circuit.

External Specifications

This fluorescent lamp emergency ballast has an unfinished cast red aluminum case that weighs in at less than 2.5 lbs. It has a compact profile with two mounting feet on each  end that fits most standard 2 or 4-foot luminaries. The ballast also comprises of an LED-charging indicator that can be installed to the body of the fixture for continuous monitoring of battery, per UL guidelines.

Electrical Specification

  • Recharge Time: 24 Hours
  • Dual Operating Voltages: 120/277 VAC, frequency 60 Hz
  • AC Operating Current: 280 mA 
  • For emergency backup, these ballasts contain a metal enclosure containing high temperature maintenance free Ni-Cd (Nikal cadmium) battery, battery charger and electronic circuit
  • AC Operating Power Rating: 3.5 Watts
  • Operates 1 or 2 fluorescent lamp(s) depend upon wattage at 600-700 lumens. Its backup time is 90 minutes in emergency mode.


  • Length: 9.4”
  • Width: 2.4”
  • Height: 1.5” 


  • UL 924 Listed
  • NFPA 70
  • NFPA 101
  • N.E.C.
  • BOCA
  • OSHA
  • IBC

Warranty Information

This product is guaranteed against mechanical, electrical and physical deficiency for 3-years from the date of shipment to the customer. The manufacturer guarantees the repair or replacement of defective parts or products within the 3-year period, which does not include removal of defective parts or consequential damages of any kind.

Find Similar Products by Category

Ballasts.com an Unlimited Lights LLC Company 3000 Old Alabama Rd
STE 119-423
Alpharetta GA 30022
+1 (800) 887-9957

card, method, payment, visa icon card, master, method, payment icon card, discover, method, network, payment icon american, card, express, method, payment icon

Copyright 2019 Ballasts.com.