Our Hatch Nano-Slim Metal Halide ballast is an ideal solution for your high intensity lighting needs. This electronic device provides needed wattage and voltage to HID lights in areas such as: roadway and parking lots.
The MC20-1-J-277X model is a micro processor controlled device featuring: a safety and low voltage lamp shutdown feature and hot lamp restrike attribute. Although it’s an electronic ballast, it operates metal halide lamps: M156 and SLi BriteSpot at 20 Watts.
Another great benefit of using this device is the ignition failure protection shutdown feature, which detects faulty circuits. It triggers in 5 seconds and is then followed by multiple timed re-strikes until the power is reset. The timing of the re-strikes depends primarily on the lamp wattage dependency.
The MC20-1-J-277X ballast can be mounted X-Nano style with the (j-bottom) studs’ configuration. With open circuitry form its wires are equipped with a short-circuit protection. It has surge protection capabilities, which are in accordance with ANSI C62.41 for Category A locations, which refer to any residential home where the ballast is located indoors and at least 25 feet away from the circuit breaker box.
Built inside a metal casing, X-Nano style with J-Bottom feed and studs, this ballast has open wiring circuitry and measures at 4.38”x1.74”x1.18”.
The ballast’s storage and operating temperature for MC20-1-J-277X ranges between -30°C and 80°C. It works at an input voltage of 277V and a current of .9A at 277V.
If you're not sure whether or not this ballast is the right one for your fluorescent lighting fixture, contact a member of our expert staff immediately!
The Ballast Co. is open 24 hours, 7 days a week. Our expert staff is available for questions and/or sales at (800) 887-9957 or sales@ballast.com.