Lightolier FBP30ST Emergency Ballast 3500 Lumens - 1-2 Lamp

Dear Customer:

Lightolier's entire emergency ballast line is now OBSOLETE. Please contact (800) 887-9957 to find an equivalent solution.

Your busy office building, like most public facilities, requires sufficient illumination 24/7, even during power failures. Normally this would require you to buy separate emergency standby fixtures. But rather than double-up on the amount of lights, just make your existing fluorescent lights pull double-duty with our self testing 3500 lumen emergency backup ballast from Lightolier.

The FBP30ST is best suited for indoor locations and will supply sufficient voltage to your fixtures AC ballast during a power outage. This dual voltage emergency battery pack features a self diagnostic circuit that perform 30-second tests once monthly as well as a full 90-minute test annually, satisfying UL 924 and NFPA testing standards.

Features

• Ballast Type: Emergency
• Lamp Wattage: 17-215W
• Input Wattage: 8W
• Dual voltage 120/277vAC, 60Hz cycles
• Operates: One or two T5, T8, T9 or T12 linear & CFLs
• Lumens (at 10-feet): 3500 lm
• Includes self-diagnostic and battery warning alarm
• Works with AC ballasts that have end-of-lamp life shutdown
• 20-gauge steel housing with powder coat finish
• Min/Max Temp: 32° to 131°F
• 5-year full warranty

Application

This 3500 lumen linear fluorescent emergency ballast has a slim profile so it can easily mount to the top of most recessed fixture housings. It works with all 1, 2,3 or 4 bulb linear fluorescent T5, T8, T12 linear fluorescents or CFLs. When a line voltage interruption is detected, it will continues to power the fixtures AC ballast for up to 90 minutes or until power is restored.

External Specifications

The FBP30ST has an impact-resistant 20-gauge steel housing that is factory-finished with an off-white enamel powder coating. This finish resists corrosion and prevents the steel from oxidation. The pack features two mounting holes on either side for easy installation to the fixture.

Electrical Specifications

• Lamp wattage: 17-215W
• Input wattage: 8W
• Dual tap 120 or 277vAC, 60 Hz
• Initial illumination: 3500Lm (depending on lamp)
• Battery: Sealed nickel cadmium cells. 10 year lifespan
• Emergency runtime: +90 minutes
• Recharge time: 24 hours or less
• Self diagnostic circuit included
• 3-5 second time delay keeps EOL ballast from deactivating
• Manual test switch included

Dimensions

• Width: 16.3"
• Depth: 5.6"
• Height: 1.7"

Compliance

• UL924: Emergency Lighting & Power Equipment
• NFPA 70: National Electric Code for installation
• NFPA 101: Life Safety Code, ch 5-9.3 for periodic testing
• OSHA illumination standards
• BOCA
• International Building Code