Sylvania QTP-1/2x13CF/UNV Quicktronic 13W CFL 4-pin Ballast

This ballast has been DISCONTINUED by the manufacturer.

Check out the Howard EP2/13CF/MV/K2 equivalent!

Our Sylvania CFL Electronic Ballast is a great solution for moderately powering lighting systems in any commercial building or facility.

The QTP-1/2x13CF/UNV was constructed in industry standard metal and its compact size and lightweight makes for a simple and stress-free set-up Speaking of installation, it’s ideal for providing the proper amount of wattage and voltage to soft white lights in restaurant eating areas and hotel lobbies and rooms. You want to prolong the life of those beautiful CFL lights for your patrons, right?

With an input universal voltage (120/277), this model works with generally with any 2 bulb 13 watt (4 or quad pin) compact fluorescent lamp as long as it meets ANSI specifications. However, it’s preferred to be fitted with Sylvania’s QUICKTRONIC PROStart DULUX D/E, T/E bulb (if you need assistance sourcing this lamp, we can help!). This electronic ballast’s start method is rapid start, which means that following a brief delay (to allow modification of power as it goes from device to bulb) the lighting will brighten. Once fully operable these “solid state ballast” are never seen and rarely heard thanks to their low noise level. 

Features

• Universal Voltage: 120/277V
• Rapid Start Method
• Recharge Time: 24 Hour
• Operating temperature: -5°F (20°C) 
• Initial Light Output: 900 Lumens
• Operates CFL lamps (4-pin)

Applications

Ideal for any CFL 4-pin lighting fixture. Works best with electrical systems in wet and damp locations with fixtures such as:

• Retail/Hospitality
• Commercial Buildings/Facilities
• Ceiling Fixtures
• Recessed Lighting

External Specifications

Constructed in tempered metal, this ballasts comes with mounting flanges (or borders) or mounting studs. Also features push in wiring connectors (copper wire recommended). 

Electrical Specifications

It has 4-pin input attachments for 1 or 2 CFL bulbs, and an outlet for dual input voltage of 120/277 V.

Dimensions

• Length: 4.95”
• Width:   2.93”
• Height: 1.35”
• Weight: 0.87 LBS 

Compliance

• UL Listed for Damp locations
• CSA or C/UL Listed
• FCC
• Type 1 Outdoor

If you’re not sure whether or not this ballast is the right one for your fluorescent lighting fixture, contact a member of our expert staff immediately!

The Ballast Co. is open 24 hours, 7 days a week. Our expert staff is available for questions and/or sales at (800) 877-9977 or sales@ballast.com.